Readers ask: How To Repair Graco Baby Swing?

Why does my Graco swing not work?

Turn the Graco swing off and wait a full three minutes, then turn the swing back on. If the swing is jarred or becomes unbalanced, the automatic safety shut-off will stop the motor. In addition, check the speed setting, as infants grow and gain weight, a higher setting must be chosen for the swing to operate.

How do I fix the click on my Graco swing?

Adjust the leg position and make sure the swing is properly balanced and not wobbling around. If that doesn’t work, it could be normal clicking from the swing changing gears. I’d call Graco customer service at 1-800-345-4109 for help.

How do you remove an engine from a Graco swing?

You need to remove the center of the part the connects to the chair. Use a thin screwdriver to pry it out a little, slide the screwdriver into the center and then pry each of the two tabs outward from the center. As you unhook it, you will be able to pry it out and then the attachment mechanism will pull off.

How do I reset my Fisher Price swing?

To restart waterglobe, mobile, music or sounds, press the reset button for another seven minutes of use.

You might be interested:  Often asked: How To Buckle Baby In Swing?

How do you stop a swing sound?

There are 5 main things you can do to stop your porch swing from making noise:

  1. Clean it!
  2. Use some old rubber.
  3. Apply a lubricant.
  4. Brace the wood.
  5. Replace your hardware.

What is the safest baby swing?

After more than 22 hours of research, including interviewing two child safety experts and spending 10 hours testing five popular baby swings, we found that the Graco Glider LX Gliding Swing, with its swaying motion, is the best for soothing babies.

How do you put batteries in a Graco simple sway swing?

With baby out of swing, open the battery compartment lid by inserting a screwdriver into the coin slot. Insert four D (LR20-1.5V) cell batteries. CHECK that the batteries are put in correctly. Your swing will not run if the batteries are put in backwards.

How do you remove a Graco swing cover?

To remove the fabric cover, you will need to unfasten the two buckles in the back on either side, as well as release the shoulder straps from their safety clips. Once you do that, you can remove it from the framing, washing it on a gentle cycle and tumble dry on a low heat or laying flat to dry.

How do you clean a Graco baby swing?

CLEANING SWING FRAME: Clean with only household soap and warm water. Do not use bleach or detergent. TO CLEAN FRAME, use only household soap and warm water. NO BLEACH OR DETERGENT.

Leave a Reply

Your email address will not be published. Required fields are marked *